The large sintering machine how to better advantage
As the main direction of development of the domestic and international sintering technology, large-scale sintering machine sinter quality, low energy consumption, high labor productivity and the level of automation and many other advantages. In order to comply with the development of sintering technology boom of the new century, the domestic steel companiespowder metal set off a major new sintering machine. At the same time, accompanied by the reduction of high-quality iron ore resources, iron ore sintering theory has made significant progress. The construction of large-scale sintering machine guidance, research and development of the integrated operation of the application to meet the large sintering machine technology, to achieve the sintering process intensification, stable operation and production, advanced technology indicators; energy conservation efforts and strengthen sintering production to achieve advanced concepts comprehensive technical and economic indicators and the level of technology to enhance the overall.
Important, in order to give full play to its many advantages, the practice of large sintering machine operation techniques for running large-scale sintering machine. To this end, a high and stable yield excellent cold and hot strength of the sinter reasonable size composition and alkalinity high pass rate target, in advance of a full feasibility study and technical preparation, exploring this premise The the large sintering machine integrated operation technology.
Mixed granulating parameter optimization control technology. Mixed granulation is an important part of the sintering process, its purpose is to mix, add water, wetting and granulation get uniform composition suitable particle size, has good permeability sintering mixed material. Most of the domestic large sintering plant to take a two-stage hybrid 450m2 sintering machine to take the three sections of the mixing step, the beginning of the design that is enhanced granulation, to improve sinter layer permeability into the focus of study and sosintered metallve process problems, both system reliability sex.
Mixing granulation process is influenced by many factors, it is to explore the relationship between the various factors in the operation. Due to the thicker layer of sintered material, the greater the resistance, the higher the negative pressure bellows, a corresponding increase in air leakage rate, to reduce air leakage rate increased difficulty. The sintering machine ventilation system air leakage is mainly reflected in: trolley in the high temperature deformation wear, bellows seals worn elastic subsided, the nose and tail at the bellows separator gap increases with the bottom of the trolley, trolley skateboard skateboarding bellows seal is not Yan gap increases contact between adjacent trolley, ventilation pipes wear out.
2012年12月27日星期四
Stud welder to lead the development of stud welding technology
Stud welder to lead the development of stud welding technology
According to the application of stud welding technology at home and abroad, will be different due to the different requirements of the development of the industry. But its development trend is mainly mandry transformersifested in:
The (1 developed large diameter studs (M25) Collaborative stud welder, the welding from the diameter of welding position to ensure the reproducibility of the welding quality in order to meet the growing needs of the construction industry.
(2 some advanced control strategies have been applied in inverter welding machine control system, fuzzy control technology and artificial intelligence technology. Development of the computer has led to advances in inverter technology. Use of fast computing power of the computer and the amount of memory big advantages to achieve some of the computer in order to achieve the control and display functions of e-commerce which will promote the development of the stud welder. developed has automated functions - simply input welding method, the diameter of the stud welding The material will be able to provide the optimum welding parameters and data collected by actual welding stud welding records, and can automatically adjust the input energy and related parameters in order to stabilize the welding quality, adaptive power inverter stud stud welding machinewelder will inevitably arise.
(3) With the stud welding applications in the industrial sector continues to expand, with product development of different types of snails is bound to further growth to welder and processing centers.
(4) short-cycle drawn arc stud welding is a promising welding technology, welding welding mode:
On first appearance molding accumulation has requested protection with ceramic ring
Second: gas protection mode, gas include: 18% CO2, 82% Ar gas mixture of both, the effect of welding the same light color, forming beautiful.
Short cycle pull porcelain ring protection or gas shielded arc welding Stud welding systemwithout, however, the accuracy requirements of the stud welder welding technology welding torch high domestic drawn arc stud welder can not introduce this technology and welding The welding stud diameter limitations in 12mm or less. So in some industries can not use automated stud welding efficient technologies.
According to the application of stud welding technology at home and abroad, will be different due to the different requirements of the development of the industry. But its development trend is mainly mandry transformersifested in:
The (1 developed large diameter studs (M25) Collaborative stud welder, the welding from the diameter of welding position to ensure the reproducibility of the welding quality in order to meet the growing needs of the construction industry.
(2 some advanced control strategies have been applied in inverter welding machine control system, fuzzy control technology and artificial intelligence technology. Development of the computer has led to advances in inverter technology. Use of fast computing power of the computer and the amount of memory big advantages to achieve some of the computer in order to achieve the control and display functions of e-commerce which will promote the development of the stud welder. developed has automated functions - simply input welding method, the diameter of the stud welding The material will be able to provide the optimum welding parameters and data collected by actual welding stud welding records, and can automatically adjust the input energy and related parameters in order to stabilize the welding quality, adaptive power inverter stud stud welding machinewelder will inevitably arise.
(3) With the stud welding applications in the industrial sector continues to expand, with product development of different types of snails is bound to further growth to welder and processing centers.
(4) short-cycle drawn arc stud welding is a promising welding technology, welding welding mode:
On first appearance molding accumulation has requested protection with ceramic ring
Second: gas protection mode, gas include: 18% CO2, 82% Ar gas mixture of both, the effect of welding the same light color, forming beautiful.
Short cycle pull porcelain ring protection or gas shielded arc welding Stud welding systemwithout, however, the accuracy requirements of the stud welder welding technology welding torch high domestic drawn arc stud welder can not introduce this technology and welding The welding stud diameter limitations in 12mm or less. So in some industries can not use automated stud welding efficient technologies.
Single-phase motor VVVF technology overview
Single-phase motor VVVF technology overview
Frequency conversion technology in the asynchronous induction motor speed control drill edm system, with its excellent speed and start-up performance, high power factor, and energy-saving effect, and was recognized as the governor of the most promising means.
Only two sets of winding single-phase AC induction motor, simple structure, low production costs, easydrill edm maintenance, small power motor applications, such as refrigerators, washing machines, electric fans, air conditioners and other household appliances, auto accessories, and other fields dominate .
1) single-phase motor winding is different from the three-phase motor, its primary and secondary windings drill edm asymmetric winding, the secondary winding series run capacitor usually brought new problems to the synthetic circular rotating magnetic field;
2) single-phase motor with the VVVF inverter main circuit structure also drill edm has its own unique side, there is the problem of how to obtain a reasonable and efficient inverter circuit;
3) for the single-phase motor speed regulation, there is what kind of control technology in order to makedrill edm a single-phase motor with three-phase motor, even with DC motor as excellent governor effect.
Frequency conversion technology in the asynchronous induction motor speed control drill edm system, with its excellent speed and start-up performance, high power factor, and energy-saving effect, and was recognized as the governor of the most promising means.
Only two sets of winding single-phase AC induction motor, simple structure, low production costs, easydrill edm maintenance, small power motor applications, such as refrigerators, washing machines, electric fans, air conditioners and other household appliances, auto accessories, and other fields dominate .
1) single-phase motor winding is different from the three-phase motor, its primary and secondary windings drill edm asymmetric winding, the secondary winding series run capacitor usually brought new problems to the synthetic circular rotating magnetic field;
2) single-phase motor with the VVVF inverter main circuit structure also drill edm has its own unique side, there is the problem of how to obtain a reasonable and efficient inverter circuit;
3) for the single-phase motor speed regulation, there is what kind of control technology in order to makedrill edm a single-phase motor with three-phase motor, even with DC motor as excellent governor effect.
The damage to the car chassis system need to immediately repair
The damage to the car chassis system need to immediately repair
When the car in the field or away from the repair site encounter chassis mechanical damage, for different fault conditions, you can take advantage of the following first aid drive the truck to the repair conditions.
It comes to car brake racingmaintenance, chassis care most likely drivers have ignored, but the importance of the maintenance of the good and bad in the winter or slippery weather chassis is quite clear. In the winter to the conservation of the chassis is necessary to completely do chassis cleaning and anti-rust treatment. Must first conduct a thorough cleaning of the chassis, the chassis on the dirt too much, but also spent oil cleaning agents to wash it again, the chassis exposed the "nature", such antirust care can begin.
In the professional beauty shop, rose to the car the lifting rack chassis cleaning, wipe longer antirust care. In the middle, it should be noted that after cleaning, be sure to wait until the water dry on the chassis can rust care. During care, be sure to maintain a uniform spray deposited coating, anti-rust coating a uniform layer retain lasting. For 5-10 minutes to dry naturally, be completed before chassis rust treatment considered complete.
Professional care of the chassis done, does not mean foolproof, of which there is a misunderstanding, it is often people order the car will car itself flush, which often add some detergent, do not use alkaline Note cleaning agent? washing powder? washing the body and chassis, otherwise it will affect the anti-corrosion effect and shorten antirust Time.
Recommend that you go to the professional beauty shops do the cards care, a simple way to test out: finish the antirust care chassis in a high pressure water jet rinse after almost not hanging drops its quality, this effect on behalf of genuine care before they can play a very good rust protection effect.
When the car in the field or away from the repair site encounter chassis mechanical damage, for different fault conditions, you can take advantage of the following first aid drive the truck to the repair conditions.
Brake wheel cylinder leak brake or wheel cylinder pipe broken in the slave cylinder pipe joints with iron, copper to be a small cushion the pipe blocked, and then tighten the screw, or the fracture folder flat, curl plugging, the wheel can not afford to brake used as. But to do so may result in unilateral braking, pay attention to safety when driving.
When the car in the field or away from the repair site encounter chassis mechanical damage, for different fault conditions, you can take advantage of the following first aid drive the truck to the repair conditions.
It comes to car brake racingmaintenance, chassis care most likely drivers have ignored, but the importance of the maintenance of the good and bad in the winter or slippery weather chassis is quite clear. In the winter to the conservation of the chassis is necessary to completely do chassis cleaning and anti-rust treatment. Must first conduct a thorough cleaning of the chassis, the chassis on the dirt too much, but also spent oil cleaning agents to wash it again, the chassis exposed the "nature", such antirust care can begin.
In the professional beauty shop, rose to the car the lifting rack chassis cleaning, wipe longer antirust care. In the middle, it should be noted that after cleaning, be sure to wait until the water dry on the chassis can rust care. During care, be sure to maintain a uniform spray deposited coating, anti-rust coating a uniform layer retain lasting. For 5-10 minutes to dry naturally, be completed before chassis rust treatment considered complete.
Professional care of the chassis done, does not mean foolproof, of which there is a misunderstanding, it is often people order the car will car itself flush, which often add some detergent, do not use alkaline Note cleaning agent? washing powder? washing the body and chassis, otherwise it will affect the anti-corrosion effect and shorten antirust Time.
Recommend that you go to the professional beauty shops do the cards care, a simple way to test out: finish the antirust care chassis in a high pressure water jet rinse after almost not hanging drops its quality, this effect on behalf of genuine care before they can play a very good rust protection effect.
When the car in the field or away from the repair site encounter chassis mechanical damage, for different fault conditions, you can take advantage of the following first aid drive the truck to the repair conditions.
Brake wheel cylinder leak brake or wheel cylinder pipe broken in the slave cylinder pipe joints with iron, copper to be a small cushion the pipe blocked, and then tighten the screw, or the fracture folder flat, curl plugging, the wheel can not afford to brake used as. But to do so may result in unilateral braking, pay attention to safety when driving.
The Bearing Manufacturing relying on machine tool industry development
The Bearing Manufacturing relying on machine tool industry development
Development is good or bad in the machine not only affect its own industrial development, the more influence the development of supporting industries. China is now the the machine big country, that is, manufacturing country, but also the country of consumption. Meanwhile, the good and bad of the machine tool industry has a direct impact to the development of other related industries, such as bearings.
Theslide bearing are indispensable parts of machine tools which one, but by the abnormal development of China's machine tool industry, the development of the bearing is almost a replica of the machine tool development. With the accelerated transformation of our automation, the annual demand for machine tools also showed a significant increase in trend in our country, but our country is currently capable of completely made the vast majority of the machine is a low-end machine, the field of high-end machine almost all foreign products occupy. Goods into the high-end machine tools, and led directly to the development of China's bearing the same for low-end products.
And bearing the use of very wide use in life, for example, in which the aircraft, nuclear power and other high-end manufacturing projects. These high-end manufacturing needs broader developmentPlastic bearing can only be achieved in the high-end bearings a completely domestic purposes, or is their development is an important constraint.
Localization efforts on high-end equipment parts in the country's 12th Five-Year Plan will continue to increase. One day before the localization of high-end bearing, the development of China's high-end equipment manufacturing industry will also be a powerful technology holders.
Development is good or bad in the machine not only affect its own industrial development, the more influence the development of supporting industries. China is now the the machine big country, that is, manufacturing country, but also the country of consumption. Meanwhile, the good and bad of the machine tool industry has a direct impact to the development of other related industries, such as bearings.
Theslide bearing are indispensable parts of machine tools which one, but by the abnormal development of China's machine tool industry, the development of the bearing is almost a replica of the machine tool development. With the accelerated transformation of our automation, the annual demand for machine tools also showed a significant increase in trend in our country, but our country is currently capable of completely made the vast majority of the machine is a low-end machine, the field of high-end machine almost all foreign products occupy. Goods into the high-end machine tools, and led directly to the development of China's bearing the same for low-end products.
And bearing the use of very wide use in life, for example, in which the aircraft, nuclear power and other high-end manufacturing projects. These high-end manufacturing needs broader developmentPlastic bearing can only be achieved in the high-end bearings a completely domestic purposes, or is their development is an important constraint.
Localization efforts on high-end equipment parts in the country's 12th Five-Year Plan will continue to increase. One day before the localization of high-end bearing, the development of China's high-end equipment manufacturing industry will also be a powerful technology holders.
2012年12月17日星期一
孩子患上異位性皮炎如何是好
孩子患上異位性皮炎怎麼辦?很多的家長在孩子益生菌膚病以後，治療是關鍵，但是在日常的看護當中也是十分的關鍵的。呢麼小孩子患上異位性皮炎平時應該怎麼樣看護呢，皮膚科專家為您做出以下扼要的解析。
首先我們看來異位性皮炎它是一種過敏性的皮膚疾病，它的發抵抗力作經常和很多的過敏起因有聯系。這是廣大的家長需要了解的一些須知，在家裏要保持清潔的環境，這樣能夠減少過敏原，灰塵，煙氣都可能引發皮炎濕疹。注意居住所的溫度和濕度，皮膚發作經常也是由於溫度和濕度有聯系。
母乳是新生兒最好的食品，它含有豐富的免疫物質，不僅可過敏提供被動性的免疫力，還能夠主動性地刺激新生兒的防禦系統。有過敏性疾病家族史的嬰兒，若完全以母乳哺育，則其發生異位性皮膚炎及食品過敏的幾率，可比用配方奶粉喂食者大為降低。
食品控制
當然醫學上未證實食品與異位性皮炎的直接聯系，但是某些食品脹氣確實會使搔癢加重，如各種禽類的蛋，海鮮，蘑菇等的食用菌。不過每個孩子敏感的食品不同，父母要長時間觀察，並避免寶寶把食品留在嘴巴四面，以減少刺激。
注意溫度適中
有些小寶寶在天氣熱的時候，輕易出汗而感到搔癢，有些是嚴寒時因幹燥而發作。因此溫濕度適中的環境對異位性皮炎寶寶是十分重要的，室溫最好保持二十五到二十八度左右。
有的時候孩子也會比較的煩躁，由於濕疹帶來的瘙癢，為此做為家長也要在異位性皮膚炎情緒上給與孩子安慰，這樣能夠減少病情進一步的惡化。知道這些看護的方法以後，專家提示及時的治療也是關鍵。
上面關於“孩子患上異位性皮炎怎麼辦”由我們的專食慾不好家提供給大家進行參考。若大家需要對自身疾病的信息有一個更加深入的了解，歡迎大家隨時咨詢我們的在線專家。
橋面纖維增強型防水施工特點
提到橋面防水施工，大家想到最多的就是防水塗料噴塗施工。隨著湖北三誠偉業一系列橋面防水塗料的研發成功，防水塗料的噴塗應用，已經廣泛在橋面系鋪裝中推廣開來。橋面防水塗料的噴塗施工，不僅防水效果明顯，而且大大的減少了成本。
而橋面纖維增強型防水粘結工藝更為突出。在湖北三誠台北防漏偉業防水工程部施工的多項工程應用中，橋面纖維增強型防水效果一致得到好評。那麼何為纖維增強型防水粘結工藝呢？它有什麼優點呢？湖北三誠偉業防水專家將給出答案。
纖維增強型防水粘結就是通過在聚合物氯丁橡膠改性乳化瀝青基台北防水橋面粘結防水粘結層中加入纖維，與防水層施工時同步切割混合噴塗，使得在防水層中間形成一層胎基，以增強聚合物改性乳化瀝青防水粘結層的粘結力和內摩擦角，從而提高水泥混凝土與瀝青混凝土板塊層間粘結強度。
相比單純噴塗橋面防水塗料的工藝，纖維增強型防台北防漏工程水粘結工藝更顯得有優勢些。
首先，纖維增加型防水粘結可提高橋面層的表面附著力，並具有強滲透力，滲透效果好。
其次，噴灑纖維增強型防水粘結層時，同步將剪切的纖台北防水工程維附著於混凝土板上，噴灑功效快，且層間粘結性能好，提高了瀝青混合料鋪裝層的抗剪強度。由於其氯丁橡膠改性乳化瀝青原材料加筋的特性，可抵抗水泥混凝土調平層產生的小型龜裂紋和細紋裂痕。
再就是，纖維增加型防水粘結可有效提高和瀝青混合料的粘結效果，台北抓漏工程提高橋面鋪裝層的整體穩定性，提高抗車轍能力，使瀝青混合料鋪裝層具有良好的高溫穩定性和低溫抗裂性能。防水粘結層具有良好的抗老化性能，不因受高溫、輾壓、低溫、霜凍等作用而降低粘結能力、抗剪能力和防水能力。
由此看來，纖維增強型防水粘結施工工藝將成為橋面防水施工的一大趨勢。
而橋面纖維增強型防水粘結工藝更為突出。在湖北三誠台北防漏偉業防水工程部施工的多項工程應用中，橋面纖維增強型防水效果一致得到好評。那麼何為纖維增強型防水粘結工藝呢？它有什麼優點呢？湖北三誠偉業防水專家將給出答案。
纖維增強型防水粘結就是通過在聚合物氯丁橡膠改性乳化瀝青基台北防水橋面粘結防水粘結層中加入纖維，與防水層施工時同步切割混合噴塗，使得在防水層中間形成一層胎基，以增強聚合物改性乳化瀝青防水粘結層的粘結力和內摩擦角，從而提高水泥混凝土與瀝青混凝土板塊層間粘結強度。
相比單純噴塗橋面防水塗料的工藝，纖維增強型防台北防漏工程水粘結工藝更顯得有優勢些。
首先，纖維增加型防水粘結可提高橋面層的表面附著力，並具有強滲透力，滲透效果好。
其次，噴灑纖維增強型防水粘結層時，同步將剪切的纖台北防水工程維附著於混凝土板上，噴灑功效快，且層間粘結性能好，提高了瀝青混合料鋪裝層的抗剪強度。由於其氯丁橡膠改性乳化瀝青原材料加筋的特性，可抵抗水泥混凝土調平層產生的小型龜裂紋和細紋裂痕。
再就是，纖維增加型防水粘結可有效提高和瀝青混合料的粘結效果，台北抓漏工程提高橋面鋪裝層的整體穩定性，提高抗車轍能力，使瀝青混合料鋪裝層具有良好的高溫穩定性和低溫抗裂性能。防水粘結層具有良好的抗老化性能，不因受高溫、輾壓、低溫、霜凍等作用而降低粘結能力、抗剪能力和防水能力。
由此看來，纖維增強型防水粘結施工工藝將成為橋面防水施工的一大趨勢。
订阅：
博文 (Atom)